What does LF on my washer mean?

WATER FLOW ISSUES

Simply so, what does lf mean on Maytag washer?

water inlet hoses

Similarly, what does lf mean on LG washer? long fill

One may also ask, what does f09 mean on a washing machine?

Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

How do I fix the LF on my washing machine?

Whirlpool Cabrio Washer Error LF EXPLAINED

1. Make sure the water supply to the washer is turned on and has pressure.
2. Check the screens on the water supply lines and the water inlet valve for blockage.
3. Make sure the washer is not filling and draining at the same time, if so check your drain hose and insure that its' not vapor locked.

How do you clear the error code on a Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What does Fl mean on my washing machine?

FL. The washer failed to lock the door.

What does f3 mean on a Maytag washer?

F3 E2 is an indication of a water temperature sensor (NTC) error, or heating circuit failure. Check the water temperature sensor and check connections to the water temperature sensor. You'll need a meter to do some checking. pugsl , 12-25-12 05:32 PM.

How do I reset my Hotpoint washing machine?

Check if the drain hose is clogged, and clear if needed. Turn the machine on with dry hands. If it still won't start, unplug it or turn the circuit breaker off, then back on until the breaker firmly clicks in place and plug the machine into the outlet. Push the restart button.

How do I fix error code f9?

The F9 error usually means the door switch circuit system is faulty. This can be addressed by checking the door switch itself. If the door switch is dirty or caught in one position, use a damp cloth to wipe the switch clean and then wiggle the switch slightly to make sure the switch moves back and forth.

How do I clear f9 code?

How to Remove the F9 Code From Maytag

1. Hold on the "Start/Stop" button for 10 seconds. This will end the beeping.
2. Open the oven door and check the door latch. If it wiggles, it needs to be tightened.
3. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
4. Press the oven door shut gently.
5. Test the oven.

How do I clear the error code on my Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What does f03 mean on a washing machine?

The F03 error code indicates that the washer has a fill problem, a drain problem or a failure in the water level pressure switch. Press STOP and fill the washer without any clothes in it.

What does e1 mean on washer?

When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water.

What does e01 and f09 mean on a washing machine?

Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

What does f08 mean on a washing machine?

heater is an open circuit

What does code f01 mean on Whirlpool washer?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.

How do I drain my LG washing machine?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.

How do I fix the OE code on my LG washer?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
2. Test the drain pump.
3. Do you hear the humming sound?
4. Clean drain pump filter.
5. Run tub clean cycle.
6. Request Repair.

How do I fix the FE code on my LG washer?

FE Error Code This is usually the result of faulty water valve. To fix this: Close both water taps. In order to drain out any trapped water, power the washer back on, and press the spin speed button until no spin is selected, and press the START/PAUSE button.

How do you fix the LF code on a Kenmore Elite washer?

LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

How do I drain water from my LG top load washer?

Drain a Top-Loading Washing Machine

1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.