The 'F21' code means that the draining cycle lasts longer than eight minutes. This can be caused by a few different problems, which include drain pump malfunction and door switch malfunction. The most common cause however is foreign objects clogging the drain hose, pump filter, or the pump itself.
People also ask, how do I clear my f21 code on my Maytag washer?
Possible Causes and Action:
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plug in the washer.
- Try to re-start the machine.
Beside above, how do I reset my Maytag washer?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
Similarly one may ask, what does it mean when your washer says f21?
The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
How do I reset my Maytag 5000 washer?
Unplug or turn the circuit breaker off for 30 seconds. Plug the power cord into the wall outlet or turn the breaker back on and wait 30 seconds. Press the Pause / Cancel / Stop button twice to clear the display.
What does f21 mean on a Maytag 3000 washer?
The 'F21' code means that the draining cycle lasts longer than eight minutes. This can be caused by a few different problems, which include drain pump malfunction and door switch malfunction. The most common cause however is foreign objects clogging the drain hose, pump filter, or the pump itself.How do you troubleshoot a Maytag washer?
How to Troubleshoot & Repair a Maytag Washer- Assess the load.
- Determine whether the washer is plugged into the electrical outlet.
- Remove any kinks from the drain hose.
- Close the washer's lid securely to add pressure to the lid switch.
- Avoid overcrowding your load; an unbalanced, heavy load can contribute to excessive water fill that can leak.
How do you reset the code on a Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.How do you reset error f21?
Reset. When the "F21" error code appears, try pressing "Pause/Cancel" to stop the current wash cycle. If water remains in the washing machine tub, touch "Drain/Spin" to force a secondary drain cycle to remove the water.How do I reset my Maytag 4000 washer?
Why would you have to reset your Maytag washing machine?- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do you reset a Whirlpool washing machine?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
How do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.How do I reset my Whirlpool Duet washer?
Unplug the washer for 30 seconds to attempt to reset the Duet washer control. if your fill hoses have a flood stop check valve turn the water off, disconnect the hoses and run a little water into a bucket. Then reconnect the hoses to your washer and do a Duet Washer Quick Diagnostic Test.How do I fix my Whirlpool Duet washer?
Whirlpool Duet Washer Door Will Not Unlock- Unplug the washer or disconnect power.
- Remove the lower kick panel.
- Reach up along the inside of the front and locate the bottom of the door switch/lock unit.
- Located on the bottom of the door switch/lock unit is a tear-drop shaped tab.
What does code f21 mean on a Whirlpool Duet washer?
F21 error code, no clogs, pumps runs and spins.What does f20 mean on a Whirlpool washer?
F20 Error Code Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error.How do I reset my washing machine?
To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.What causes a Maytag washer not to spin?
The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.Why does my washing machine not spin all the water out?
If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose. Test to be sure the drain pump is working properly.How do you lift a washing machine by yourself?
Here are the preparation steps when moving a washing machine by yourself:- Remove any clothes from the washer.
- Clean out the drum.
- Dry out the drum.
- Disconnect the power supply.
- Shut off the water supply.
- Drain the hoses that supply water.
- Remove and pack the hoses that supply water.
- Empty the washer's drain hose.
How do you reset a front load washer?
How to reset the washing machine:- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
