What chemicals do I add first to my pool?

Pool Chemical Startup List

• Adjust Total Alkalinity. Ideal range: 80 – 120 ppm.
• Adjust pH. Ideal range: 7.4 – 7.6.
• Balance Calcium Hardness. Ideal range: 200 – 400 ppm.
• Add sanitizer (chlorine, bromine, or biguanide) Ideal range: 3 ppm (chlorine)
• Measure Total Dissolved Solids.
• Shock the pool.
• Test the water.

Also question is, what chemicals do you put in a pool for the first time?

How To Maintain A Swimming Pool Part 1 (Chemicals)

• Chlorine- This is your primary sanitizer.
• Bromine- Bromine is an alternative to chlorine.
• pH- This is a measure of the water's total acid-alkalinity balance.
• Shock- This is another type of chlorine.
• Alkalinity- Also referred to as total alkalinity is a measure of alkaline in the water.

Beside above, how do you start a pool for the first time?

1. Place the garden hose in the deep end of the pool, making sure to tie a cloth over the end of the hose to diffuse the water pressure.
2. Test and correct the pH level to 7.2 – 7.6.
3. In the early evening, add 2 cups of HTH® Granular for every 10 000 liters of pool water.
4. Filter continuously for 24 hours.

People also ask, what chemicals do you put in a pool?

• TriChlor: 3” tabs, or 1” tabs or sticks.
• DiChlor: granular.
• Bromine: 1” tabs.
• Cyanuric Acid: Liquid or dry chlorine stabilizer.
• Calcium Hypochlorite: Cal Hypo pool shock is used to quickly sanitize pool water, boost chlorine levels and kill algae.

What to do when you first fill your pool?

there are a few things you need to do before to taking your first official dip. They include cleaning the bottom of the pool and testing the filter, along with adding chemicals to adjust the pH, free chlorine concentration, total alkalinity, water hardness and cyanuric acid concentration.

How long after filling a pool Can you swim?

This procedure can take anywhere from 1 week (for basic plaster surfaces) or up to 30 days (for dark-colored finishes). Don't worry, you will not have to wait an entire month to swim in your new pool. Within about 1 – 2 weeks (depending on your choice of pool interior) you can dive in!

How much chemicals do I add to my pool?

Most pools use about 2 tablets per week, per 10,000 gallons of pool water. Use your test kit or test strips to determine the correct number of tablets and correct chlorinator setting, to maintain a constant chlorine level of 1-3 ppm. You can buy chlorine tablets in 10, 25 or 50 lb.

Will the fire dept fill a pool?

News flash: the fire department will not send a truck to your house to fill up your swimming pool. Water from fire trucks is not potable or suitable for swimming.

Do I use shock or algaecide first?

Chlorine combines with the algaecide ingredients and renders them useless. The best time to introduce an algaecide , which functions best as a preventative, is after you've shocked the pool and the chlorine level has fallen below 5 parts per million.

What order do you adjust pool chemicals?

Add one chemical at a time, or add them into different areas. Test and adjust in order. First alkalinity, then pH, then calcium. Use the Saturation Index to consider water Temperature.

How do you keep a pool clean without chemicals?

How to Clean Your Pool Without Chemicals

1. Replace the chlorine with salt. Chlorine is the most common solution for cleaning swimming pools and one of the most dangerous as well.
2. Cover the pool to keep debris away.
3. Let the robotic pool cleaner do the job.
4. Oxygen pool cleaning technology.
5. Use sphagnum moss.

Does adding chlorine increase pH?

Using liquid chlorine raises the pH of the water. Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH. So the net effect on pH is zero (or almost zero).

How often should I add chlorine to my pool?

The ideal chlorine value for a swimming pool In addition, you have to keep the chlorine content at the right level. Ideally, the chlorine value should be between 1 and 1.5 ppm. During the swimming season, we recommend checking these values twice a week.

How do you treat new pool water?

Most pools will need startup chemicals to adjust pH and hardness, sanitize the water, and prevent algae growth.

1. Optional Anti-scaling Product.
2. Adjust the pH.
3. Adjust Total Alkalinity.
4. Sanitize the Water.
5. Adjust Hardness.
6. Add Algaecide.

Can you shock your pool during the day?

What Is the Best Time of Day to Shock a Swimming Pool? Shock your pool late in the evening or at night, when the sun is down, to make sure free chlorine will stay in your water longer. Ultraviolet (UV) rays from direct sunlight greatly reduces free chlorine levels, so shocking during the day will not be very effective.

How do I balance the pH and alkalinity in my pool?

1. Step 1: Take Accurate Readings of pH and TA in the Pool.
2. Step 2: Set a Target Value for Total Alkalinity.
3. Step 3: Dilute Muriatic Acid as Directed and Add It to the Water.
4. Step 4: Test the Pool Water's Alkalinity and pH After 6 Hours.
5. Step 5: Take Readings Again After 24 Hours.
6. Step 6: Take Final Water Test 48 Hours Later.

What chemicals do I put in my above ground pool?

Chlorine tablets are the most common and efficient sanitizer to use in above ground pools. These tablets are compressed so that they dissolve slowly and steadily release free chlorine into your water to wipe out bacteria and keep your water clean. Chlorine also comes in sticks and granules.

Do I need to shock my pool when I first fill it?

The short answer to your question is, yes, you want to put a "start-up" dose of chlorinating agent into your pool to get it to the proper chlorine level (or slightly higher); from there, a "maintenance" dose of chlorine such as from the tablets will keep the proper level.

Can you fill a pool at night?

Hi, with 12" of water in the pool you should be fine to let it fill all night. The stretching should be done and the liner tight against the wall. If so, let it go. There is some air gap between the liner and the wall in a few areas.

Do I add chlorine or shock first?

Low chlorine levels often cause green or hazy water, so if your water looks a little cloudy and you haven't shocked in a while, adding shock is the first step. It is always best to shock the pool in the evening, when the sun if off the water. You should use chlorine tabs in conjunction with shock.

Can I use household bleach in my pool?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.

Do you shock a new pool?

Every pool is different, and pools don't need to be shocked, unless they need to be shocked – to remove bacteria, algae, chloramines or other contaminants, or to help clear cloudy pool water or some other water problem. You can test for chloramines and you can see algae, but bacteria and other pathogens are invisible.