On the one hand, inside-mounted blinds foster a clean, modern look that shows off the window trim. On the other hand, outside-mounted blinds conceal the window trim but do a better job of blocking light. There's no right choice; it all depends on the room in question and your style preferences.
People also ask, can you mount blinds on trim?
You can mount your blinds to the trim as long as it is flat and meets the minimum requirements for an outside mount. Mounting on the trim of the window is the easiest route because all you need to collect is the size of the trim dimensions.
Subsequently, question is, should blinds go inside or outside window frame? Inside mounted blinds and shades will give you the cleanest look. That is because they fit inside the window frame, and can be mounted as deep or as shallow as you like. Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation.
Hereof, do outside mount blinds look good?
Outside Mount Blinds This does not give your window treatments that recessed or flush look, but does provide superior light control. For this reason, outside mounts are recommended for blackout shades. Otherwise, there will be light gaps on the left and right sides of the shades.
Do Roman blinds look better in the recess?
In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
How much space do you need on side of blinds?
Blinds.com recommends at least 1.5" of overlap on each side of the window for blinds and shades, and 2" of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.How do you hang window blinds with trim?
Outside mount blinds or shades can be mounted 2 ways – to the trim around your window, or to the wall above the window opening (like the photo above). If you're mounting to the trim, measure the width of the trim at the top of the window.Can I drill into a vinyl window frame to hang blinds?
If you have vinyl windows, you won't be able to screw the brackets directly into the vinyl channel that holds the window. The vinyl is not strong enough to hold the weight of the blinds. Fix the brackets to the top or sides of the inside opening or install them outside the opening.How much depth do you need for inside mount blinds?
Inside mount blinds are installed inside the window casing or door, or wall to wall in a room. The window casing must be at least 2 3/4" deep for flush track mount or 3 3/4" deep for flush vane mount (See diagram above). Window should have a minimum recessed space of 2 3/8" for inside mount.Can I screw blinds into window frame?
You can very easily screw into the window, I sometimes use a sharp plasterboard screw to start the hole off, saves drilling a pilot hole. You could also drill through the cloaking at the side, then use a masonry drill into the wall. I'd use the window, and white silicone would cover any holes in future if necessary.Should blinds touch window sill?
In most cases blinds look and work the best when they rest on the window sill. No one is ever going to notice extra 1/2" of length and this keeps them from blowing in a slight breeze. If you prefer for the blinds not to touch the windowsill, you should deduct 1/4".Should Roman shades be inside or outside mount?
Inside, is duh… inside the window frame and IMO usually preferable, especially if there's a pretty window casing. Outside mount is when the shade is outside the window frame. There are a few different reasons why we do that sometimes.Where do you put blinds on a deep window sill?
For outside mount, the brackets should be placed on the face of the window outline on the two sides of the window. And for inside mount, the brackets should be put up against the inside top corner of each side window.What's the difference between exact and recess?
A blind that is fitted outside of the recess is normally referred to as an exact fitting, and is attached to the wall above the window, covering both the window and part of the wall on either side of the recess.How do you hang blinds without brackets?
How to Hang Wood Blinds Without Brackets- Drill two holes through the face of the head rail approximately 1 inch inward from each end.
- Place the head rail over the top window trim and center it over the window.
- Drill pilot holes into the top window trim with the drill and a drill bit approximately half the size of your screws.
