Corrugated Steel Decking
| P3606 Series Gage | Finish | Price |
| 20 | Painted - Grey Top, White Bottom | $205.00 |
| 20 | All Galvanized | $210.47 |
| 18 | Painted - Grey Top, White Bottom | $291.10 |
| 18 | All Galvanized | $287.00 |
People also ask, how much does metal decking cost?
Type of Metal Deck
| Gauge | Price Per Square Foot |
| 20 | $3.75 - $4.50 |
| 18 | $4.25 - $5.25 |
| 16 | $5.00 - $6.00 |
Similarly, what is a square of metal decking? Square. In deck terminology, it is the term for 100 square feet of metal deck or roofing surface. Formula: number of squares = sum of(length of deck sheet in feet * width of steel deck sheet in feet * number of pieces)divided by 100. Square Cut. A cut to a structural member made at 90 degrees to the length of the
Beside above, how much is a steel deck in the Philippines?
Steel Deck Price List (per meter)
| Design | 0.8mm | 1.0mm |
| Steel Deck 1 | ₱660 | ₱850 |
| Steel Deck 2 | ₱220 | ₱280 |
| Steel Deck 3 | ₱330 | ₱425 |
What is steel decking used for?
Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. It was developed to provide a structurally efficient product for use in roof and floor systems.
How far can metal decking span?
If you choose the latter, you'll have a little less steel because you have fewer joists to install, but you're replacing all those joists with heavier decking. reach spans of 30 ft.What is Q deck?
What is Q deck? “Q deck” was the common name for the HH Robertson Company's “Q-Lock Floor” composite floor deck, which was produced in 2” and 3” depths. The modern equivalents of 2”-QL-99 and 3”-QL-99 are 2” deep composite floor decks and 3” deep composite floor decks.What gauge is metal decking?
Metal decking is most commonly 16, 18, 20, and 22 Gauge in thickness.What does steel decking weigh?
Steeldeck® platforms have a very good strength to weight ratio. A 4' x 8' Steeldeck® platform weighs approximately 150 lbs and supports an evenly distributed load of more than 4,000 lbs.How thick is metal decking?
Nominal thicknesses range from 0.030 in. (0.76 mm) to 0.060 in. (1.52 mm).Why is metal decking corrugated?
The Benefits of Corrugated Floor Decking. Corrugated metal is a lightweight building material that provides remarkable rigidity given its slim profile. That strength makes it an ideal addition to concrete floors in need of extra reinforcement.What is composite metal deck?
Composite Metal Deck. Composite deck was designed with a ribbed profile or bump outs in the flutes called “embossments." These embossments grip the concrete as it cures creating a reinforced concrete slab that serves as a permanent form with positive reinforcement.What is a deck slab?
Basically the Deck slab is the part of structures which is constructed over the girders and being used by the vehicles to cross over the bridge. It also acts as a medium to bind the girders, as the load of vehicles is directly taken by the deck slab and further transfered to the girders.What is a composite slab?
A composite slab is a slab made with profiled steel sheeting as permanent shuttering, capable of sustaining the weight of the wet concrete, the reinforcement steel and the construction imposed loads in the construction phase.What is a metal roof deck?
Metal Deck Steel roof deck is designed for pitched, flat, or arched construction on virtually all types of buildings. Roof deck is popular because it is strong, lightweight, economical, and easy to install. Roof deck can be produced with acoustical, cellular, or cellular/acoustical properties if required. 
