How much does a 1953 Ford Jubilee weight?

With a wheelbase of 73.86 inches, the Jubilee measures a total of 119 inches long, 64.75 inches wide and 74 inches tall. Its operating weight is 2,814 lbs., while its ballasted weight, or weight added to counter additional implements, is 4,392 lbs. In the front, this tractor uses 5.5-16 or 6-16 tires.

In this regard, how much is a 1953 Ford Jubilee tractor worth?

The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA's aren't difficult to find they are popular with collectors and in like-new condition can command premium prices.

Subsequently, question is, how many horsepower is a Ford Jubilee tractor? Ford Golden Jubilee NAA

Ford NAA Power
Drawbar (claimed): 20.2 hp 15.1 kW
PTO (claimed): 30.15 hp 22.5 kW
Plows: 2* Use of three 14-inch was common
Drawbar (tested): 26.8 hp 20.0 kW

Then, what year is a Ford Jubilee tractor?

1953

Does a 1953 Ford Jubilee have live PTO?

It doesn't have a live pto. You will need an overrun clutch on equipment such as a rotary mower or the mower will push you forward. A live pto is the same on any tractor.

Is a Ford Jubilee a good tractor?

While the Jubilee is not as full-featured as a modern tractor, it has enough bells and whistles to accomplish all sorts of chores on a small farm. These tractors are very reliable but any tractor this old will need replacement parts every now and then. This is where the Ford Jubilee really shines.

How many horsepower is a 1953 Ford Jubilee?

Capacities and Power The tested power for the drawbar of this tractor is 26.8 horsepower, and for the belt, it is 31.14 horsepower.

How much horsepower does a 8n Ford Tractor have?

The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.

How much was a Ford 8n new?

Ford 8N
Production:
Total built: 524,000
Original price (USD)
$1,404 (1952 )
Variants:

How do you find out what year my Ford tractor is?

Look for the production code of your Ford tractor. Generally it will be on the side of the vehicle adjacent to the starter. It may also be located on the exterior hull in any given location. You should be able to find a metallic plate that has 3 different serial codes.

What is the difference between a Ford 8n and a Jubilee?

Re: Jubilee or 8n An 8n has a significantly better power/weight ratio than a Jubilee which may be important if you are going to trailer it. It also has a more durable hydraulic system and considerably better fuel economy as someone has already mentioned.

When did Ford stop making tractors?

1954

Where is the serial number on a Ford Jubilee tractor?

The serial number is located on the left hand side of the engine block, just below the head. The 8N switched from the front mount distributor to the side mount distributor in 1950 at serial number 263843. Ford Jubilee & NAA 1952-1954.

How do you repaint a tractor?

On areas that you are not going to sand down to bare metal, rough up the surface with the 350 grit paper or coarse steel wool. Sand everything you are going to paint.

Paint Your Tractor

  1. Time.
  2. Respirator.
  3. Sand Paper.
  4. Paint .
  5. Paint Gun .
  6. Air Compressor.
  7. Spray can primer .
  8. Masking Tape.

What kind of hydraulic fluid does a Ford Jubilee take?

The correct fluid to use in the transmission, hydraulic reservoir, and rear differential section is Universal Transmission Fluid (UTF) equivalent to Ford/New Holland specification 134D. This is Ford/New Holland approved practice. You can get this fluid from Tractor Supply Stores, auto parts stores, Wal-Mart, etc.

Does Ford still make tractors?

Today, Ford is still the only major auto maker in this country with its own line of tractors, although Ford's annual tractor sales of about $1.3 billion are dwarfed by its automotive sales of nearly $50 billion.

What HP is a Ford 600 tractor?

The Ford 600 Series tractors began production in 1954, and continued until 1957. Quite similar to the Ford NAA (Golden Jubilee) in design, it used the same 132 cubic inch Red Tiger engine with 31 horsepower.

How much does a Ford 2000 tractor weight?

Ford 2000
Production:
Wheelbase: 75.8 inches [192 cm]
Weight: 3020 to 3362 pounds
Front tire: 5.50-16
Rear tire: 12.4-28

What is the difference between a Ford 8n and 9n tractor?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n's and 9n's had front distributor.

How many horsepower is a Ford 601 Workmaster?

32 horsepower

When were Ford 8n tractors made?

The Ford 2N evolved into the Ford 8N, which officially started it's production in 1947 and was made through 1952. Equipped with the Ferguson System three-point hitch and 4-speed transmission, the Ford 8N model was destined to become the top-selling individual tractor of all time in North America.

How much does a Ford 800 tractor weight?

Dimensions and Tires The Ford 820, 850 and 860 tractors weigh 3,400 pounds operating and 6,700 pounds ballasted. The 850 and 860 models share their other dimensions, measuring 121.8 inches in length, 64.75 inches in width and 59.3 inches in height. They have 75.18 inch wheelbases and 21 inch ground clearances.

You Might Also Like