How do you use the cavity feature in Solidworks?

Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity. In the PropertyManager, under Design Components, select the design parts from the FeatureManager design tree. Under Scale Parameters: Select the point about which scaling occurs for Scale about.

Correspondingly, how do you cut an object in Solidworks?

To cut a solid body with a surface or plane: Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. The Edit command might vary depending on the feature you select. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.

Beside above, how do you make a mold in Solidworks? The simple way of creating camera mold.

1. First of all add Mold tool command. Open existing part.
2. Add Scale. Scale depend on material you use.
3. Create Parting line.
4. Shut Off Surfaces, this close all gaps.
5. Create Parting Surface.
6. Create Core and Cavity by Tool Split.
7. Enter value of Core and Cavity.
8. First Result.

Also to know is, how do you boolean in Solidworks?

1. In part simple extrude and create a body. Now using combine/indent tool, subtract the main body from the other body.
2. Insert part into part. Now using combine/indent tool, subtract the main body from the other body.
3. Open your assembly. Right click on the part you want to subtract from and select edit component.

What is the definition of core and cavity in injection mold?

Core is an extended or male portion of the mould which creates the internal plastic part surface whereas Cavity is a depression or female portion of the mould which creates the external plastic part surface.

How do you make injection molded parts?

Design rules for injection molding

1. Make the transition as smooth as possible at section of non-uniform wall thickness.
2. For best results:
3. Hollow out thick sections.
4. Add smooth transitions.
5. Round all edges.
6. Add wide radii to all edges to maintain uniform wall thickness and avoid defects.
7. Add draft angles.

How do you subtract in Solidworks?

To subtract bodies:

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Subtract.
3. For Main Body, select the body to keep.
4. For Bodies to Subtract, select the bodies whose material you want to remove.
5. Click Show Preview to preview the feature.
6. Click .

How do you do a split feature in SolidWorks?

To split bodies:

1. Click Split (Features toolbar) or Insert > Features > Split.
2. In the PropertyManager, set the options.
3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names.
4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save.
5. Click .

How do I add a part to a part in SolidWorks?

To insert a part:

1. With a part document open, click Insert Part (Features toolbar) or Insert > Part.
2. Browse to a part document and click Open.
3. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do you cut a half part in SolidWorks?

Outcomes

1. Create a plane through the middle of your part, or draw a sketch that is a line that shows where you want to split the part.
2. Click insertfeaturesplit.
3. Select the plane or sketch to be the trim tool.
4. Under resulting bodies, enter the file names for the two bodies.
5. Uncheck consume cut bodies.

How do you cut a line in SolidWorks?

Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim. as it crosses and trims the sketch entity.

How do you cut a boundary in SolidWorks?

Boundary PropertyManager

1. Click Boundary Boss/Base (Features toolbar) or Insert > Boss/Base > Boundary.
2. Click Boundary Cut (Features toolbar) or Insert > Cut > Boundary.
3. Click Boundary Surface (Surfaces toolbar) or Insert > Surface > Boundary Surface.

How do you merge bodies in SolidWorks?

To add bodies together:

1. Click Combine. (Features toolbar) or Insert > Features > Combine.
2. In the PropertyManager, under Operation Type, select Add.
3. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies.
4. Click Show Preview to preview the feature.
5. Click .

How do I create a core in Solidworks?

In this example, the recessed feature on the front of the plastic part is a trapped molding area that requires a core. tool to create the core.

To create a core:

1. Open a sketch on the inside face of the Cavity Body, as shown.
2. Sketch the outline of the core you want to create.
3. Close the sketch.