How do you use a traverse rod for rod pocket curtains?

1. Mount the traverse rod supports and bracket according to the packaging instructions. Hang the rod in the supports and brackets.
2. Measure the width of your curtain panels. Cut a piece of pleater tape to this size.
3. Lay the curtains flat, wrong side up.
4. Carry one curtain panel at a time to the traverse rod.

Just so, how do you hang rod pocket curtains on a traverse rod?

How to Hang Non–Pinch-Pleated Drapes on a Traverse Rod

1. Turn the drapery panel inside out and check for the presence of heading tape.
2. Measure the space from the wall to the front of the carrier on the traverse rod.
3. Indicate pin placement marks along the top of the back of the drapes by inserting a straight pin, perpendicular to the top edge, equidistant across the panel.

Subsequently, question is, can you use rings with rod pocket curtains? Each style has its own advantages and disadvantages. Specialty curtain rings with clips attached allow you to hang any type of lightweight or medium-weight curtains from a curtain rod. Hooks or curtain ring clips can be used on rod-pocket curtains.

Similarly, how do you use regular curtains on a traverse rod?

To hang curtains on a traverse rod, you attach drapery hooks to the curtains, and then slip the hooks through holes in the carriers. When you pull the cord, the carriers move along the track. The key to making your own traverse rod curtains is choosing a style that looks and functions right with the carrier system.

What type of curtain goes on a traverse rod?

Decorative poles and rings or grommet curtains are good choices for some windows, but there are situations where only traverse curtain rods will do.

How do you hang back tab curtains on a traverse rod?

Insert a drapery pin into the seam so the bottom edge of the pin aligns to the pin mark and hook the pin into the carrier of the traverse rod. Insert pins, at the same distance from the top edge, into the outside edge seams of the curtains.

Are pinch pleat curtains out of style?

Pleated Panels Pleated drapes work best with formal decorating styles. Pleated panels are a classic style of drapery and so never really go out of fashion, although their popularity rises and falls with current trends. They look quite formal, so work best with formal or traditional decorating styles.

Can you hang back tab curtains with hooks?

Many drapes come with back tabs where you can clip the rings, or you can pinch the fabric to create pleats. When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining.

What is a rod pocket curtain?

Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.

How do you hang curtains on a hook?

Hanging Drapery Hooks:

1. Use the Right Size Hooks. Check the back of the top of your curtain.
2. Prepare the Curtain. Lay the curtain out in front of you face-down on the work surface.
3. Insert the Hooks.
4. Hang the Curtain.

How do you make pinch pleated drapes?

Instructions

1. Step 1: Measure & cut.
2. Step 2: Sew the sides of the panel.
3. Step 3: Sew the top & bottom.
4. Step 4: Attach the pleater tape & hooks.
5. Step 5: Tack the pleats (optional)

How do you measure curtains for a traverse rod?

Determine your rod width: For center-draw draperies: Rods can be mounted on the window frame, or any place on a wall you want to cover. Decide your bracket position and then measure the width between the brackets. If you don't already have a traverse rod, add 4” to each side, left and right, to account for return.

How do you hang curtains with pinch pleat hooks?

How To Hang Pinch Pleat Curtains

1. Lay the curtain face down on a clean flat surface.
2. Work out approximately the correct distance from the top of the curtain to put the hook.
3. Insert the hook into the curtain slightly to one side of the pinch pleat (see photo above).
4. Insert a few hooks and then hang the curtain whilst holding the rest of the curtain.

What are pinch pleated curtains?

Pinch Pleated Curtains & Draperies. Sort by. Pinch pleated curtains and pinch pleated draperies have gathered fabric folds at top that create a custom made look, at affordable prices. Pinch pleated draperies work best with a traverse rod, the traverse rod moves the draperies when the cord is pulled.

Can you change eyelet curtains to pencil pleat?

For example, altering traditional curtains to eyelet curtains is currently a popular request. It is often possible to replace or add new tape or tabs to existing curtains or even change from pencil pleat to pinch pleat, providing there is sufficient fabric.

Should curtains touch the floor?

The fabric should just touch the floor or hover half an inch above. This is also a great approach for café curtains (short panels that cover only the lower portion of a window and hit the sill), which work well in spots like the kitchen and bathroom, where long drapes aren't practical.

Should I use curtain rings?

Function. In room where you'll be opening and closing your drapery on a daily basis, we strongly suggest using hanging clips or ring clips. Because you'll want to control the amount of light, you'll want to be able to effortlessly slide the curtains along the rod.

How do you hang curtains without a rod?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don't require drilling.

How much length do curtain rings add?

Most clip-on rings add approximately 1, 1 1/2 or 2 inches to the length of the drapes, depending on the size of the rings.

Can you hang grommet curtains with rings?

They have a clean-lined, simple look that works well in casual and contemporary interiors. You won't need rings, clips or hooks because the hanging hardware is built in, making grommet panels one of the easiest and least expensive curtain types to hang. Measure the width of your window, including any molding.

How do I make curtain rings?

Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain. Fold the bottom 2cm of the panel under and lightly iron.

How many rings should a curtain panel have?

We recommend using 7 drapery rings to hang each 50"W rod pocket panel, and 13 rings to hang each 100"W rod pocket panel. Our sheer rod pocket drapery can be used with clip rings (A). Also referred to as “pinch pleat”, this is the most traditional style available.