VIDEO
Just so, is Janome dc3050 a low shank machine?
Janome DC3050 Presser Feet Included in the purchase of this sewing machine are four snap-on style, low-shank presser feet: Zigzag (General Purpose)
Also, why is my Janome Sewing Machine not sewing? Skipped stitches may be caused if the needle is dull, damaged, inserted incorrectly or if it is the incorrect type or shape of needle for your machine is used. Are you using the correct needle for the fabric you're sewing with? The machine might need cleaning around the feed dog. Re-thread the top and the bobbin.
Simply so, why does my thread keep breaking on my Janome Sewing Machine?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. The thread does not roll out of the bobbin case smoothly.
Why is my sewing machine not sewing?
Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
How do I know if my sewing machine is low shank?
Put your presser foot in the down position. Measure from the bed of the machine to the center of the thumb screw (presser foot holder screw). If the length from the bottom of the presser foot to the center of the screw is half an inch, you have a low shank machine.What is the difference between a high shank and low shank sewing machine?
Singer slant is for slant needle machine only. A high shank machine measures approximately 1 1/4" from the screw to the bottom of the foot. A low shank machine measures approximately 3/4" from the screw (small dot in picture above) to the bottom of the foot.Is my Janome a low shank machine?
Above is a standard low shank Janome machine on the left and my beloved Janome ruler foot combination on a high shank machine on the right. Those are the easy machines. These are considered a high special and use the same feet as the Janome 1600P.What size shank is my sewing machine?
When you measure it, you lower the presser foot and measure the distance from the bottom of the foot to the Center of the screw. A low shank should measure 1/2 inch. A high shank should measure 1".Is Janome 6600 a low shank?
In this case, depending what feet you are looking for, the ones for 6500 and 6600 are all low shank clip on feet. If you are looking for a darning foot, get one that would fit a low shank machine. The only difference between 6600 and 6500 and other low shank machines is the Accufeed foot.What does low shank sewing machine mean?
A high shank machine measures approximately 1 1/4" from the presser foot screw to the bottom of the foot. ( Uses High Shank Sewing Feet) A low shank machine measures approximately 3/4" from the presser foot screw to the bottom of the foot. ( Uses Low Shank Sewing Feet)Are Janome and Brother feet interchangeable?
No, they won't fit properly. Yes, both machines have 7mm feet and the foot may snap on the shank. I have both Janome machines and Brother/Babylock and have tried pretty much every foot with minimal success. Janome/new Elna are the same under the different brands.Is Juki a low shank machine?
The Juki TL98 is an industrial machine that is high shank. The company also makes low shank machines for the homemaker who likes to sew their own clothes instead of paying high fashion prices.Are sewing machine feet interchangeable?
Unlike some sewing machine accessories, presser feet are interchangeable between various brands. The only thing you need to be concerned with is the type of shank you are working with.Are all Janome bobbins the same?
Some sewing machines will tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine. The original bobbins that come with every new Janome machine are guaranteed genuine Janome bobbins.Why is my sewing machine not picking up the bobbin thread?
Machine will not pick up bobbin thread. - Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. - Make sure that the upper thread is threaded properly. - Re-thread your machine, if necessary. 
