First, put you bike on a stand with the front wheel off the ground. Loosen your triple clamps(upper and lower). With the wheel off the ground spin the front tire and then hit the front bike hard. This will straighten it out.Also know, can you straighten bent motorcycle forks?
One rule of thumb is if you can SEE the bend, it's probably too bad to straighten. The old metal moving thing. The main reason we straightened tubes was to try and smooth out suspension action. A slight stick as the suspension moved was usually the only sign of problems.
Similarly, how do I know if my triple clamp is bent? If tubes appear bent, roll them to be sure. Or clamp in vice and put a dial indicator on and rotate the tube. Bent triples can be found by removing the front axel. If it's hard to line up (the front axel) and the forks aren't bent, you triples need to be straightened or replaced.
Beside above, how do I know if I have bent handlebars?
Check for obvious signs of bending such as cracked paint or metal. If these are present, the bars are definitely bent. The bars should be symmetrical, so you'll want to get an angle finder. You can place it on each bend of the handlebar and compare the angle with the same bend on the opposite side.
What is a triple clamp on a motorcycle?
A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis.
How do you straighten a triple tree?
Try straddling the front wheel , holding it straight and twisting the handlebars the appropriate direction. If you can't , then loosen the triple- clamp bolts , either both side on top OR both sides on bottom , not top AND bottom. You'll be able to turn the forks straight.How much does a motorcycle alignment cost?
Motorcycle alignment cost is not outrageous — in many parts of the country you can have it done for less than $75 — but honestly, because it's a simple process, you can probably do it on your own.How do you fix a bent fork on a dirt bike?
Inspect the front of your bike for damage. If the front wheel isn't aligned with the front fender, then it's necessary to straighten the front end. Start by removing the front number plate with an 8mm T-handle wrench. Then loosen the bottom triple clamp pinch bolts with a 10mm wrench until they are finger-tight.How do you know if your motorcycle frame is bent?
RE: How do you check if a frame is Bent? Make sure the rear wheel is aligned properly. your grip on the bars. If the frame is bent there's a good chance there will be some wobble or pulling to one side.How much does it cost to fix bent forks?
Anywhere from $50 to $1000 if you bent the forks.What is fork out in bike?
A bicycle fork is the part of a bicycle that holds the front wheel. A fork typically consists of two blades which are joined at the top by a fork crown. The crown is often at the front. Most suspension forks have an arch connecting the two side of the lowers (the part connected to the axle.) 
