How do you reset the airbag light on a Hyundai Sonata?

How to Reset the Airbag Light on a Hyundai
  1. Find the diagnostic-link connector underneath the driver's side of the car on the dashboard.
  2. Put the key into the ignition and turn it two clicks forward to the "On" position.
  3. Turn on the OBD II code reader and use the arrows to navigate the menu.

Similarly, how do you fix the airbag light on a Hyundai Sonata?

How to Reset Hyundai Airbag Light

  1. Locate the OBD-II port under the dashboard.
  2. Plug-in in one of the scanners mentioned above.
  3. Turn the ignition to position II.
  4. Select the Hyundai model (Elantra, Tucson, Accent, Santa Fe, Sonata, Genesis, Azera, Veloster, Equus etc.)
  5. Select airbag / SRS in the menu.
  6. Select Read Codes.

Furthermore, how do I reset airbag warning light? How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the "on" position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Also asked, why is my airbag light on in my Hyundai Sonata?

There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.

Can you reset airbag light without tool?

You should always check the airbag codes with a scanner and repair the problem before trying to reset the light. It's possible to reset it without a scanner, but you do not really want to reset an airbag light when the problem still occurs, because you can make the airbags to deploy.

What can cause the airbag light to come on?

A common reason air bag lights come on is because something is interfering with the seat belt switch — the sensor that detects if the belt is properly fastened — which could trigger a false warning light related to the air bags, says Robert Foster, owner of Foster's Master Tech in Bozeman, Montana.

Is it safe to drive with airbag light on?

It is not safe to drive with the airbag light ON. When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible. If your airbags are not functional in a crash, it may cause death or serious injuries.

How much does it cost to fix airbag light?

Cost To Fix Airbag Light. The average cost to replace your airbag on your vehicle will vary determine on your vehicle manufacturer and if you plan on replacing the airbag yourself. Some airbags may only cost $100 to $300 for the airbag itself, but you will likely be charged $1000 to have the airbag by a mechanic.

Where is the airbag module located?

The location of the airbag module differs from vehicle to vehicle depending on the make and model of it. In some vehicles, it is located in the center console, kick panel, under the radio, or behind the steering wheel. Generally, though, it can be found underneath the driver's seat or front passenger's seat.

How do I know if my Hyundai is recalled?

Check your Hyundai Vehicle Identification Number or VIN at recalls to see if it has any open recalls. For more questions relating to Hyundai Vehicle Recalls, please call the Hyundai Customer Service phone number, 1 (855) 671-3059.

Who makes Hyundai airbags?

The National Highway Traffic Safety Administration is investigating about 12.3 million airbags made by auto supplier ZF-TRW and installed in vehicles from Fiat Chrysler, Honda, Hyundai, Kia, Mitsubishi and Toyota. The airbags are used in model-year vehicles ranging from 2010 to 2019, according to a government document.

How do you reset the airbag light on a Hyundai?

How to Reset the Airbag Light on a Hyundai
  1. Find the diagnostic-link connector underneath the driver's side of the car on the dashboard.
  2. Put the key into the ignition and turn it two clicks forward to the "On" position.
  3. Turn on the OBD II code reader and use the arrows to navigate the menu.

How do you turn off the passenger airbag in a Hyundai?

But the passenger airbag can be deactivated if the car is equipped with a Passenger Airbag Cut Off Switch (PACOS). In most cases, to disable the airbag you need to have the ignition switched off to avoid any possible malfunctions. The PACOS is usually located in the passenger side of the dash board.

How do I get the airbag light to turn off?

How to Turn Off the Airbag Light
  1. Turn on the ignition switch with your car key.
  2. Wait for the airbag warning light to turn off.
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.
  5. Turn your ignition switch back on to fully reset the airbag light.

What does it mean when the airbag light stays on?

If your airbag light is on, it could also indicate a problem with your seat belts. Your airbag or SRS light might also come on if your vehicle was in an accident that activated the crash sensors in your car, but not to the point where the airbag deployed. In this case, you need to have your airbag reset.

How do you reset the airbag light on a Hyundai i20?

Step 4 - Turn Ignition "On" After 3 Seconds After you have the ignition off for three seconds, you will need to turn the key back "On." Repeat the first few steps two more times and you will see that you have reset the airbag light on the dash. You will know that it is reset once the light comes on and turns off.

Are there any recalls on 2011 Hyundai Sonata?

NHTSA Vehicle Safety Recalls. Hyundai Motor America (Hyundai) is recalling certain 2011-2013 Sonata and 2011-2012 Sonata Hybrid vehicles. On February 27, 2018, Hyundai Motor Company (Hyundai) notified NHTSA that they were recalling 154,753 model year 2011 Sonata vehicles. Hyundai's number for this recall is 174.

What is Srscm?

The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The SRSCM must perform a diagnostic routine and light a system readiness indicator at key-on.

Are there any recalls on 2008 Hyundai Sonata?

Summary: HYUNDAI IS RECALLING 393,714 MY 2006-2008 SONATA VEHICLES EQUIPPED WITH AN ADVANCED AIR BAG SYSTEM WHICH FEATURES AN OCCUPANT CLASSIFICATION SYSTEM (OCS) IN THE RIGHT FRONT SEAT. THE RECALL IS EXPECTED TO BEGIN ON OR ABOUT MAY 26, 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.

Will removing fuse disable airbag?

The dust that comes out of the airbags won't hurt you, but you don't want it all over you or in your eyes, either. The NHTSA says that you can't remove or disable the airbags on any registered, road-driven vehicle newer than 1996 without a waiver. Simply pulling the airbag fuse may not disable the airbags.

What does it mean when a car's airbag light is on?

If the airbag light is on, it means that the airbag will not be able to deploy in the event of an accident. This is a dangerous proposition, and it means that you should avoid driving if at all possible until you've had the problem diagnosed and fixed.

CAN obd2 reset airbag light?

#2. OBD2 scanner can read fault car code and reset SRS. However, you need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it. There are many OBD2 scanners on the market. They work with 1996 and newer models and can solve not just SRS issues but other basic and advanced problems as well.

You Might Also Like