Then, how do you change the line on a Ryobi trimmer head?
Grasp the string head with one hand, and unscrew the knob on top of it with your other hand by turning the knob counterclockwise. Remove the knob and trimmer cover, and lift out the string spool. Pull out all old string. Cut an 18-foot piece of 0.095-inch-diameter string from a roll, and fold it in half.
Also, how do you string a Ryobi trimmer plus? How to String a Ryobi Trimmer Plus
- Unplug the trimmer from the extension cord or power outlet.
- Rotate the outer spool of the trimmer head until the arrow on the spool aligns with the arrow on the inner reel of the head.
- Measure two 10-foot lengths of 0.080 nylon filament trimmer line, and cut it with scissors.
Then, how do I remove the line from my Ryobi trimmer?
- Turn off the Ryobi trimmer.
- Hold the spool of line in one hand and rotate the bump knob counterclockwise.
- Remove the knob.
- Let the trimmer come to a complete stop.
- Locate the two opposite tabs on the sides of the spool retainer.
- Pull up on the old spool to remove it.
How do you get rid of a bump on your head?
Pull straight out to remove the bump knob from the hub. You may have to pull hard to remove the knob. For weed eaters with screw mounted bump knobs, grasp the outer spool and hold it in place with one hand. Use your other hand to twist the bump knob counterclockwise until it unscrews from the spool.
