How do you program a Rainbird ESP 4tm?

VIDEO

Accordingly, how do you reset Rainbird ESP?

How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings?

Turn the dial to Seasonal Adjust.
Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word "CLEARED" on the screen.
Turn the dial back to AUTO RUN.

Secondly, how do I program my Rainbird sprinkler timer? Turn the dial to "Set Watering Start Times" and press the up and down keys to set the desired time. The system will turn on all the valves for that program in sequence at the time selected. If more than one watering cycle is desired each day, press the "Manual Start/Advance" key and then select another time.

Thereof, how do you change a fuse in a sprinkler system?

Fuse Replacement Unplug the sprinkler controller from its power source. Pull the blown fuse out of the clips that hold it by hand -- do not attempt to use pliers, since the glass could break. Some controllers come with a spare fuse taped to the inside of the panel door that can be used as a replacement.

What does no AC mean on a sprinkler system?

The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is running on the power supplied by the backup battery. Check the power source by plugging a lamp or radio into the wall outlet to verify there is power at the outlet.

How do you reset a sprinkler system?

How to Reset a Sprinkler System

Turn the control dial to the "off" position.
Press the "next" button to access the clear-memory feature.
Press and hold the "off" button until the display stops blinking.
Turn the control dial to the "run" position.
Press and hold down the "minus" arrow and "prog" buttons simultaneously.

Why doesn't my sprinkler shut off?

Disconnect one of the valve wires. If the valve shuts off, the problem is with the timer. Open the top of the valve and remove the diaphragm. Turn on the water supply and flush the valve out for 15 seconds.

What is Seasonal Adjust on Rain Bird?

Automatic Seasonal Adjust allows the Rain Bird server to keep track of local weather based upon the programmed ZIP/Postal Code. The Rain Bird server will calculate a daily Evapotranspiration (ET) rate for each ZIP code and translate to an appropriate seasonal adjust value.

Why does my Rainbird sprinkler system run twice?

A common reason why a program is repeating is that you have a second start time set. The start times control the exact time your ESP-Me timer will begin to water and they also control how many times a day your timer will water. The ESP-Me allows you to set up to 6 start times per program.

What is MV error on Rainbird?

1 point · 1 year ago. I'm not familiar with Rainbird but all controllers tend to use similar language. When a controller reads a fault, it usually means that the circuit is open, usually at the valve itself.

How do you shut off a Rainbird sprinkler head?

Do what it takes to free up that tiny screw in the center of the head. Turn the tiny screw in the center head counter-clockwise with a screwdriver until it feels tight, which generally will take between a quarter and a half turn. Run your sprinkler system to make sure you have properly turned the head off.

Why does my irrigation system finish watering and then start again?

A common reason for a controller to repeat a cycle is too many programmed start times. When a station has completed its watering time, the controller will switch to the next station in that program automatically.