How do you make a homemade hand fan?

Beautiful Homemade Hand Fan

1. Step 1: You Will Need . . . - colored cardboard paper (I used black)
2. Step 2: Cut Out the Circle. Using the compass, draw as big a circle on the cardboard as will fit.
3. Step 3: Fold the Fan.
4. Step 4: Trim the Edges.
5. Step 5: Punch the Holes.
6. Step 6: Paint and Decorate.
7. Step 7: Make the Closer.
8. Step 8: Finished!

People also ask, how do you make a hand held fan?

9 Steps + 1 Tip for Perfect Paper Fan

1. Fold and cut card stock into 4 equal pieces.
2. Fold first piece in ½-inch accordion-style pleats.
3. Tip: Measure and score the card stock before folding for near-perfect pleats.
4. Trim any uneven ends – use pinking shears to create a decorative pattern.

Furthermore, how do you make a wooden hand fan?

1. Cut the wood into 30 slats or tines.
2. At the base of each tine, drill a small hole (the size of the pivot).
3. Stack the tines and thread the pivot through.
4. Spread the tines so they are laying out like a fan.
5. Pull on the fan and ribbon until the fan is spread exactly as you want it and the ribbon is taut.

Correspondingly, how do you make a simple paper fan?

How to Make a Simple Paper Fan

1. Step 1: Into the Paper Box. Go to the place where you get paper in your home.
2. Step 2: Folding, Folding,folding
3. Step 3: Down the Hill and Up the Hill.
4. Step 4: Fold the Top!
5. Step 5: Unfold?
6. Step 6: More Folding!!!???
7. Step 7: Are You Trying to Waste My Time!!!???
8. Step 8: Unfolding Is Such Hard Work!

What are the parts of a hand fan called?

Parts of a Folding Fan

• Filet: Thumb piece attached to the guards at the pivot pin/rivet that acts as an ornamental reinforcement.
• Gorge: The part between the head and the leaf.
• Guards: The two outer sticks, normally thicker and stronger than the inner sticks and sometimes highly decorated, that act as protection for the closed fan.

How do you make decorative fans?

1. Step 1 – Fold Accordion Style. First we will make the large fans.
2. Step 2 – Fan Out The Folds. You will now fan out the folds using the fold as the center point of your circle until the ends meet.
3. Step 3 – Cut Out Circles. Next cut 10 circles out of your remaining sheets of scrapbook paper.
4. Step 4 – Secure Your Paper Fans.

How do you make a fan out of paper and popsicle sticks?

Begin by using school glue to glue four wooden popsicle sticks into a fan formation. To do so, first place a small dot of glue on the bottom of each stick, press the bottoms together and then fan the sticks out into a "v" shape, spaced about 2 inches apart at the top. Let the glue dry completely.

How do Chinese kids make fans?

DIY Lunar New Year Fans

1. Supplies:
2. Step 1: Score each paper on the 1/2″ mark.
3. Step 2: Accordion fold each piece of paper.
4. Step 3: Using a glue stick or hot glue, adhere each fan piece together until you have one seam left then glue a craft stick to each side.
5. Step 4: Once dry, open up your fan and enjoy!

How do you fold a fan?

Easy DIY Origami Fan Diagram - Step 1

1. Starting white side up if you have one. Fold the paper in half, top to bottom.
2. Next, cut of the top section, leaving you with the paper being 4 by 3.
3. Refold the crease at the top.
4. Fold the paper in half, right to left and unfold, this is creating the vertical central crease.

How do you make paper fan medallions?

DIY Paper Fan Medallions

1. Take paper and begin to accordion fold into 1” sections.
2. Once the entire paper is folded accordion style, fold the paper in half “hamburger style”.
3. Repeat Steps 1 and 2 four more times with the remaining sheets of paper.
4. Glue the folded halves of paper together, repeat this step on all 5 pieces of paper.

How do you make pinwheels?

This page of instructions will lead you through the steps to make your own pinwheel.

1. Begin with a square of paper.
2. Fold your square, corner to corner, then unfold.
3. Make a pencil mark about 1/3 of the way from center.
4. Cut along fold lines.
5. Bring every other point into the center and stick a pin through all four points.

How do you make a paper hand?

Origami Skeleton Hand

1. Step 1: Square. Make an origami square and then fold in half from corner to corner.
2. Step 2: Base. Unfold the triangle and then fold other way.
3. Step 3: Base 2. Fold the paper like the picture.
4. Fold the triangle in half cemetricaly. Fold top to bottom on middle line.
5. Step 5: Hand.
6. Step 6: Fingers.
7. Step 7: Curves.

How do you make a paper wind fan?

1. Cut two 20cm squares of paper, one in each colour. Place one sheet on top of the other.
2. Cut from one corner along the diagonal fold stopping around 3cm from the centre.
3. Fold four alternate corner sections down to the centre of the paper, holding each section under your thumb at the centre as you work.

How do Japanese people hold their fans?

When using a fan, it is important to do so in a leisurely, fluid way, so as to amplify its beauty. To open the fan, push the sticks with your left thumb so as to stagger them open. To open the fan, push the sticks with your left thumb? The last 1–3 sticks should be left closed, however.

How are Chinese fans made?

The Chinese form of the hand fan was a row of feathers mounted in the end of a handle. In ancient China, fans came in various shapes and forms (such as in a leaf, oval or a half-moon shape), and were made in different materials such as silk, bamboo, feathers, etc.

How do you make a Japanese fan?

You will need 10 wood sticks to make the fan.

1. Step 1: : Pierce a Hole in Each Wood Stick.
2. Step 2: : Insert a Head Pin Through the Sticks.
3. Step 3: : Close the Other End of the Head Pin.
4. Step 4: : Draw an Arc on White Paper.
5. Step 5: : Position the Wood Sticks.
6. Step 6: : Trace an Outline of the Sticks.