Transport Lock - Park machine safely. (See Parking Safely in the SAFETY section.)
- Disengage PTO.
- Stop engine and lock park brake.
- Raise mower deck using deck lift pedal.
- With deck in raised position, rotate knob (C) counter clockwise into the transport lock position.
- Release pedal to lower deck to transport setting.
Then, how do you lower the blades on a riding lawn mower?
Riding Mowers
- Find out the type of grass you're going to be cutting.
- Locate the height adjustment knob or lever on your riding mower.
- Lower the mower's deck by either turning the knob counterclockwise or by pulling the lever toward the rear of the mower.
Furthermore, should a mower deck be level? Deck pitch is very important to be able to get the most amount of productivity out of your mower. A deck should be level from side to side and the front should be slightly lower than the back.
Then, should mower deck wheels touch the ground?
With that setting, the deck wheels will or should be "just touching the ground or flat surface". If you have the deck wheels set too high, and when the mower deck "swings/bounces" up and down or tips to the left or right you will get scalping on the left or right sides.
What height should a lawn mower be set at?
Always Mow at 3 Inches or Taller Often the highest setting on most mower types is 3 inches. Mowing the grass at 3 inches or taller will prevent diseases, promote deep digging roots, help the grass conserve water, improve turf density, and improve turf color.
Is a push mower deck height supposed to be the same at the front and back?
This is normal for most mowers. The front of the mower deck should be lower than the back. The reason is you only want the blade to cut the grass once. If the blade were level, the drag of the grass on the blade would bog the engine down or take more power to do the same amount of work.Are John Deere mowers good?
For any consumer who possesses a big yard, he will need a mighty tractor lawn mower. Naturally, John Deere covers all of the bases in this category. The firm's tractor mowers are as good as they get.How do you measure a mower deck?
If there is no obstruction, feed your tape measure through the pulleys, across the center of the deck, and hook it on the opposite side. For a round deck, locate the widest area of the circle, or the diameter, and extend your tape measure across that area. Note the distance on your tape measure. This is your deck size.Why does my mower leave stripes?
A strip of uncut grass left in the middle of mowing rows could signal that your lawnmower's blades are unbalanced or that one or both of them was installed the wrong way. Ensure that your mower's blades are on correctly, that both are secured tightly to the mower deck and that both are balanced.What causes a riding mower to cut uneven?
Uneven cutting is wavy or smooth troughs in the lawn surface. Uneven cutting is usually caused by mower deck damage or misadjustment.Why does my push mower cut better backwards?
A lawn mower may perform better in reverse than forward gear for a number of reasons. When a gas powered lawn mower runs in reverse, its blade continues to spin in the same direction as it would if the mower were operated in the forward gear. Blade sharpness issues, therefore, can be discounted in powered mowers. 
