How do you hang curtains with a valance?

Hang Your Valance Run the valance rod through the top of the valance or use curtain hardware to attach the valance to the rod, depending on which style of valance you've chosen. Attach the valance rod to the brackets and adjust the valance so that the fabric is spread out evenly.

Also know, where do you hang a curtain rod for a valance?

Place the rod on the brackets for the valance. The brackets should be sturdy enough to hold the valance. The valance should hang down straight, just outside the curtain rod.

Subsequently, question is, do you need a double curtain rod for a valance? Buy two different curtain rods. Lightweight curtains and sheer panels can be hung with a café rod, while heavier material will need a regular curtain rod that comes out from the wall about 2 inches.

Keeping this in view, how far above a window do you hang a valance?

The pole or valance should be positioned a minimum of 4 inches and a maximum of 12 inches above the top of the window in most cases. Even a budget valance or unlined curtain panel can look well done and professional when hung at the proper height above the window.

How much of a window should a valance cover?

For most windows, a valance should cover about 2 to 6 inches of the top of the window and window frame (this is called the window overlap), with the rest of the valance covering the wall above the window. If there is not enough room to do this, then the valance should be hung immediately under the ceiling.

How do you hang a curtain and valance on one rod?

How to Hang a Valance and Curtains

1. Before you start hanging your window treatments, make sure you have the right tools to get the job done.
2. The wall-mounting brackets for your curtain rod should be half the length of the brackets for your valance.
3. Mark the placement of the first bracket with a pencil and tape measure.

Can you make a single curtain rod into a double?

However, many homeowners and renters have a single curtain rod, and do not know how to switch them to decorative double rods. Converting the window treatment is a simple process and requires only a conversion kit and about a half an hour. Using double curtains are an inexpensive way to create a new look for a room.

Where do you hang a valance?

You'll have more freedom to hang the valance as you desire in a room with higher ceilings, but it's best to still hang it high. With 9- or 10-foot ceilings, the valance should hang at least halfway between the top of the window and ceiling.

How does a bed valance work?

A valance is a decorative sheet that hides the base of your bed, a bit like a skirt. A Base Valance covers the bottom of a divan bed and is fitted under the mattress. A Sheet Valance covers the mattress and the bottom of the bed and is fitted over the mattress, acting as the fitted sheet as well as the Valance.

How wide should a valance be?

It depends on many things, but generally speaking, the valance will need to be somewhere between 2 to 3-1/2 times the width of the window you're trying to cover. For example, if the window is 50 inches wide, the valance should be about 100 to 150 inches wide when laid flat.

How long should you make a valance?

The length of the valance should be 1/4 the window height plus one inch. Using these measurements, cut a rectangle from your fabric and lining. Place the fabric and lining right sides together.

How long should a box pleat valance be?

Estimate the length of the valance from top to bottom. The finished valance covers 1/6 of the window. Divide the length of the window by six. Take the figure and add 1/2 inch for the seam at the top and 8 inches for the bottom hem.

Are curtains supposed to touch the floor?

As a general decorating rule, drapes should be long enough to touch the floor. The amount of drapery material reaching the floor depends on the desired look of the curtains once they are hanging around the windows.

What is the normal length of a window valance?

14 inches

Are short curtains out of style?

Short Curtains Visually speaking, high-water style is not the most appealing way to hang curtains. The shorter length can appear dated. Also, it can cut the visual height of your room in half. From a purely practical standpoint, however, short curtains are sometimes the best option.

How do you measure window valances?

How to Measure for a Window Valance

1. Measure the width of the window opening from the inside left of the frame to the inside right.
2. Multiply the installed width of a gathered valance by 1.5 to 2.5, depending on the fullness you want, for its finished width before installation.

How do you sew a lining in a valance?

Fold 1/2 inch to the back of your valance on both sides and pin as you go and then iron the seam. This will be the short end of the fabric. Use a straight stitch to sew the seams. Repeat with the lining fabric.

How many inches from ceiling should curtains be hung?

Ceiling Height The typical height for hanging drapery on a window that has more than 12 inches of space between the top of the window and the ceiling is about 4 to 6 inches above the window trim. If there is not at least 12 inches of space, hanging the curtains at window level may highlight the limited space.

Can I hang curtains without a rod?

Coat Hooks Besides holding raincoats and bags, they can also be used to hang curtains. To install them, intersperse the coat hooks at an even distance across the window. Coat hooks are easier to hang than traditional curtain rod hardware and don't require drilling.