How do you choose curtain tracks?

1. Begin by measuring the width of the existing curtain pole or track.
2. The total width of a pair of pencil pleat curtains required for the window will be approximately two times the width of the curtain pole or track.
3. If you prefer a more gathered look, choose a wider curtain and gather the curtains more tightly.

Furthermore, what type of curtains do I need for a track?

Pencil pleat curtains can be hung from a track or a pole. Tab top and Eyelet curtains must be hung from a pole. Pinch and Goblet pleat curtains can be hung from a track or pole but as they hang underneath either, to enable the curtains to concertina back properly, the track or pole will be in full view.

Subsequently, question is, how do you hide curtain tracks? Common methods of hiding the track including fitting it behind a pelmet, installing it into a ceiling cavity or bulkhead, or having it hidden behind the curtain heading using a face-fix hook system.

Also question is, how do you hang curtains on a track rail?

The heading tape has three rows of pockets. For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole.

What length should a curtain pole be?

For the best fit your track or pole should be 15-20cm above your window, and should stretch 15-20cm wider than the window on each side.

Which type of curtains are best?

When it comes to material, linen, silk, faux silk and velvet are the best choices to use for window treatments since they tend to hang the best, says Guercio. "Faux silk tends to be the most durable," she says. And in a particularly sunny room, faux silk doesn't deteriorate as quickly as real silk.

Can you hang pencil pleat curtains on a track?

Hanging pencil pleat curtains on a track. - Along the track: place the hooks at 4' intervals The curtain or voile curtain is ready to be hung. Thanks to these fixtures, you can adapt your pencil pleat curtains to a track: position them along the top of the curtain at intervals of around 6' and tighten the screws firmly

Do pencil pleat curtains use hooks?

Now that the curtains are pulled up you need to put in the curtain hooks. In most pencil pleat heading tapes there are three rows of pockets to choose from. Hooks should be placed in the heading tape every four pockets or so, depending on how many runners or hooks you have.

How do you measure for curtains?

Place the measuring tape at the top of the window frame or in the top inside corner and measure down to your desired length. For a higher curtain placement, measure up from the top window frame 20 inches to achieve an elongated appearance.

What are the types of curtains?

Here are the seven most popular curtain styles:

• Pinch pleat (or tailored pleat) curtains.
• Box pleat curtains.
• Goblet pleat curtains.
• Pencil pleat curtains.
• Eyelet (grommet) curtains.
• Rod-pocket curtains.
• Tab-top curtains.

How do you hang curtain tracks on the ceiling?

Ask an assistant to help lift and hold the track against the ceiling. Slide a ceiling support connector toward the end of the track until it's 2 to 3 inches from the end. Align it with the ceiling joist; tighten it against the track, and attach it to the ceiling using a drill and the provided screws.

How do you make plastic curtain tracks run smoothly?

Spray the track with furniture polish. Well it's probably better to spray a little onto a cloth or bit of kitchen roll and rub that along the surfaces of the the track where the hooks run. Less chance of getting overspray on the wall paper etc and you don't need a great deal of the stuff anyway.

How do you hang a curtain rod without a drill?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side. Don't be in a rush.

Do you have to gather pencil pleat curtains?

If your curtain has a pencil pleat heading, you must start by knotting together the three rows of string at the top of the heading tape. Then, half the total number and this is what you must pull your curtains to. Hold all three strings at once and pull as evenly as possible.

How high should a curtain pole be above the window?

about 15cm

What are curtains with hooks called?

Pencil Pleat, also known as Tape Top or 3” Tape curtains, is the standard heading for curtains and valances. Pencil pleat curtain heading usually consists of three rows of string threaded through it for three hook positions to suit all types of track and pole.

Can you hang curtains from the ceiling?

If you have a shorter ceiling, it's recommended you simply hang your curtain directly onto the ceiling so as to avoid making your space look too short. Once you've measured out the height of your floor to your ceiling, add 1 or 2 inches to your curtain length if you want your curtains to touch the floor when hung.

How does a curtain track work?

Curtain tracks are made from either plastic or metal and are used to hang and draw curtains that have heading tape. You can't use eyelet curtains or tab top curtains with a curtain track. They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.

How do you make a pelmet?

1. Step 1: Measure the Windows. Measure your windows.
2. Step 2: Cut the Timber. My pelmets for 1800mm windows were 2080 in the end (1800 + 140 +140).
3. Step 3: Drill, Then Glue and Screw.
4. Step 4: Add Curtain Rod Hooks.
5. Step 5: Put Up Brackets.
6. Step 6: 'Upload' the Pelmet
7. Step 7: Curtains and Rods.

How do you cover a curtain track with fabric?

Cover neatly with a strip of fabric, turning in all the raw edges and staple in place. Screw the curtain track onto the pelmet board directly behind the fascia making sure that the gliders run freely below it. Screw vine eyes into the ends of the board.

How do you remove a traverse rod slide?

Replace broken slides so the rod continues to function as intended and the curtains do not sag.

1. Unhook the curtains from the rod.
2. Pull the string so that the slides move toward the ends of the rod.
3. Lift the rod from the brackets.
4. Pull the finial closest to the broken slide off the drapery rod.