How do you change the code on a Kwikset electronic lock?

Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.

Similarly, it is asked, how do I change the code on my Kwikset SmartCode 909?

To override a code in position #1, please follow these instructions: with the door open and locked, press and release the program button one time, enter the new user code on keypad and then push the lock button.

Likewise, how do I reset my Kwikset lock? A factory reset will delete all codes associated with the lock.

Make sure the door is open and unlocked.
Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
Press and release the program button. You will hear one short beep.

Similarly, it is asked, how do I remove a Kwikset lock code?

If you have enabled a programming code, enter you programming code, then press Kwikset. You will hear one short beep and the keypad will flash green. 3. Press 2 to delete a user code.

How do I change the code on my Kwikset lock 913?

Open the door.
Remove battery cover.
Press the program button once.
Enter new user code.
Press lock button.
If programming is successful the keypad will flash green once, and you will hear one beep.

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own.

How do you reset a Kwikset 910 lock?

How to perform a factory reset:

Remove the batteries.
Press and hold the lock button on the keypad.
Place the batteries back in (while still holding the button)
The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

How do you enter a Kwikset lock code?

Press the "Program" button on the interior keypad. Enter a four- to eight-digit code on the outside keypad. Press the "Lock" button in the center of the outside keypad. This programs a code for the first user.

How do you remove the code from a keypad lock?

Deleting User Codes

Press the program button.
Press the lock button.
Enter user code to delete.
Press lock button.
Re-enter user code to delete.
Press lock button.
If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).

What is Kwikset SmartCode?

Electronic Smart Deadbolts |Keyless Entry | Keypad Deadbolt | Kwikset Smartcode. Featured Fight germs with Microban finishes.

How do I rekey a Kwikset lock?

First, insert the functioning key and turn it ¼-turn clockwise. Then, insert and remove the SmartKey learn tool. Follow by removing the functioning key, inserting a new key, and turning it ½-turn counter-clockwise. Your lock is then successfully re-keyed.

How does Kwikset smart key work?

When the user wants to rekey the lock, the working key is used to rotate the plug 90° clockwise. A special tool known as the "Smart Key" is used on the small hole to the left of the keyway. This physically disengages the sidebar and wafers from the guide pins and allows the working key to be removed.

Why is my Kwikset lock blinking red?

Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red.

Why does my Kwikset lock beep?

The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt. To turn the beeping sound off: Reinstall the battery cover.

How do you reset a Kwikset 909?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 3. Press the Program button once more.