The process - Gathering tapes come in different widths.
- Make a narrow hem on either side of your curtain panel.
- Make a large hem on the top and bottom.
- Then fold over about four inches and press.
- See what I mean by having the strings stick out further?
- Stitch along the top and bottom of the gathering tape.
Moreover, how do you make drapery header tape?
Measure each panel from the top to make sure the panels are the same length, then fold under 1/2 inch along the lower hem edge. Fold under the lower edge 3 inches, pin and sew the lower hem in place. To gather the curtain into pleats, insert pleater pins into the pleat pockets that are woven in the header tape.
Subsequently, question is, what is curtain tape? Pencil Pleat, also known as Tape Top or 3” Tape curtains, is the standard heading for curtains and valances. Pencil pleat curtain heading usually consists of three rows of string threaded through it for three hook positions to suit all types of track and pole.
Also asked, how do you make pinch pleat curtains with tape?
Instructions
- Step 1: Measure & cut.
- Step 2: Sew the sides of the panel.
- Step 3: Sew the top & bottom.
- Step 4: Attach the pleater tape & hooks.
- Step 5: Tack the pleats (optional)
What is a header tape on curtains?
Curtain tape (also known as 'heading tape') helps gives you closer control of the pleating in each curtain.
How do you attach lining tape?
Sew down the flap of the loose lining tape so that it traps the lining. Take your main curtain and your loose lining. To attach the loose lining to your curtain, loop your curtain hook through the loose lining tape and through your heading tape. Continue to do this until all your hooks are in place.How do you make Ripplefold curtains?
You can make ripplefold curtains from flat panels of fabric, creating the ripples by means of snaps on the header of the curtain panels that allow the fabric to be pleated to a given fullness. Once you attach the snaps to the carriers on the track, you can slide the curtains open and shut.How much curtain header tape do I need?
Standard Curtain Heading - 3" Or 6" Deep Tape For the best results for this type of curtain heading aim for a minimum fullness of 2.25 times the rail width. This will give an adequate amount of fullness to the pencil pleats, across the full width of the window when the curtains are in the closed position.What is Buckram tape?
Buckram for curtain headings is used to create hand made headings such as pinch and goblet pleats on hand pleated curtains. It is used instead of using curtain tape. It is made from 100% cotton and stiffened so it keeps the pleats in place. Heavy sew-in buckram is used for long curtains or heavy weight fabrics. 
