How do I reset my magic light?

If you're experiencing any problems with your MagicLight WIFI Bulb try resetting it to factory settings. Simply turn your bulb on and off a total of 4 times. Leave the bulb on 5 seconds each time it's switched on. After the fourth time, your bulb will strobe briefly and then turn solid white.

Accordingly, how do I reset my magic home led strip?

To reset a bulb you switch it on and off four times and leave it on about one to two seconds each time. After the fourth time the bulb will strobe. After strobing is done turn off and turn back on. The bulb is now reset back to factory settings and you can pair it to a home network again.

Beside above, how do you reset LED lights? How to Reset LED Strips

1. Plug your LED strips in and turn it on for a few seconds.
2. Turn it off then take out the power adaptor without turning off the remote control.
3. Press and hold the power button for a few seconds then connect the power supply again.

People also ask, how do you connect a magic light?

How To Set Up MagicLight WiFi Bulb

1. Step 1: Install your MagicLight WiFi smart bulb into a powered OFF light socket.
2. Step 2: Power up your Smart bulb. (
3. Step 3: Download and open the "MagicLight WF V2" app for either Apple or Android.
4. Step 4: Tap the "Plus" in the upper right corner and select "Add Device".

How does the magic light bulb work?

Obviously it's a light up bulb, so it will need to touch metal in order to light. Unlike other bulbs out there, you need to touch the metal bottom of the bulb to the golden metal sides of the bulb in order for it to light up. This allows the bulb to be handed out for examination and no one will find out the secret!

What is magic home?

Magic Home. Connect your Magic Home to Amazon Alexa, Google Assistant and more. Magic Home provides an extraordinary experience with your smart home appliances. You'll be able to build connectivity tasks through IFTTT like turning off the bedroom light when you leave home.

How do you connect LED bulbs to music?

The steps to use this led music bulb:

1. Applied this bulb to the E27 base,and then power the bulb.
2. The bulb is lit up,then you can use the remote control to adjust the light color.
3. Turn on you bluetooth device (you phone etc), search and connect to the bulb.

Why is my smart light not connecting?

Power on the device and confirm that the light is blinking quickly. In the Geeni app, on the top right corner of the Devices screen, click (+) & select "Smart lighting". Make sure the bulb is flashing quickly, indicating it's ready to connect. If not, turn the bulb off and on 3 times until it is flashing quickly.

How do I reset my phone?

Factory reset your Android phone from the Settings menu

1. In the Settings menu, find Backup & reset, then tap Factory data reset and Reset phone.
2. You'll be prompted to enter your passcode and then to Erase everything.
3. Once that is done, select the option to reboot your phone.
4. Then, you can restore your phone's data.

Why are my smart lights not working?

If your bulb is not responding Make sure the outlet is receiving power. Turn the bulb off and on. The bulb takes up to one minute after receiving power to reconnect to your device. Try your light and see if it works!

How do you reset Google Lights?

Make sure to turn power on and off at the wall switch and not within the app.

1. Start with light off for at least 5 seconds.
2. Turn off for 2 seconds.
3. Repeat this process 5 more times, or until the light bulb flashes. The light will flash 3 times if it has been successfully reset.

Why are my smart lights flashing?

Flickering or blinking lights are usually caused by one of four things: Problem with the bulb (not in tight enough, wrong bulb type for dimmer switch) Loose light plug. Faulty light or fixture switch.

How do I reset my smart plug?

Press and hold for 10 seconds to reset (LED flashes green and the Smart Plug resets upon release). Use the app to reconfigure network settings. Reset the smart plug to factory defaults, then follow the initial setup instructions again. Unplug the Smart Plug, then press and hold the power button.

How do I open WLAN settings?

Solution 1: Turn Your Android Phone into Wlan Hotspot

1. Open Hotspot on Android Phone. Turn on your Android phone. Then go to "Settings" > "Tethering and Mobile hotspot" > "Mobile Hotspot".
2. Configure Hotspot. Hit the menu button and select "Configure hotspot". Then you can modify the Network SSID.

How do I set up a Magic home cloud account?

Open the Google Home app. Click "Add" and then "Set up device". Enter your MagicLight app account email and password to finish the account linking. (using your MagicLight cloud account you used in step 1).

What is the app for LED lights?

Litake LED Strip Lights, WiFi Wireless Smart Phone APP Controlled Light Strip Kit 32.8ft 300 LEDs 5050 Waterproof IP65 LED Lights, Working with Android/iOS System, Alexa.

Why won't my LED strip lights work?

Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. If your RGB strip lights won't change colors try flipping your strip light around and reconnecting it. Incorrect Power Source – Make sure to double check which power source your lights require.

What is WLAN security setting?

WLAN Security Setting Set an encryption key for an access point. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature. None. Do not set an encryption key.

Why are my LED light strips different colors?

Color shifts are experienced at the end of the LED strips. Typically, if the end of the LED strip is of a different brightness or color than the beginning of the strip, there is insufficient power being provided to the device.

What is magic Home app?

Magic Home is a wifi controlled APP for smart led lighting. WiFi RGBW led controller. It has ON/OFF,colors,dimming,timer,fade.

How do I program my LED remote for DIY?

DIY function Step 1: Turn on the lights. Step 2: Press one of the RGB buttons. For example, press red button if you want to DIY red color. Step 3: Press the DIY1 button (the lights will change to white color for the first time).