There is probably no way for them to move just the guy wire. The pole will have to be relocated. That will probably mean rerouting the utility. Not something they are likely to do just on your whim.Likewise, can power lines be moved?
Depending on the easement, you may not be able to have them moved. But the best answer is to call the utility company have them tell you if it can be done and the cost if allowable. They will be the ones doing it or having it done anyway. The easement allows their control over the easement.
Additionally, how can I hide my guy wires?
- Hide the guy wire by planting attractive perennials the draw your eye away from the unsightly areas.
- Sew together lengths of ripstop nylon to create a large sheet of fabric.
- Remove the eye from unsightly guy wires by making them a part of the utilitarian portion of your yard.
- Things You Will Need.
- Warnings.
Consequently, can you get a telephone pole moved?
Contact the utility company. They will provide you with guidelines on how it can be done. The pole can be moved but at a cost which should be properly documented and communicated to you. This is done at a cost because it is you who has requested for the pole to be moved.
How do you remove a utility pole anchor?
Re: Removing a utility pole guide wire anchor Attach a chain to it, Attach chain to FEL. Pull the FEL up till its tight then take a crowbar and turn the post out. You might have to adjust the FEL upwards as you do it. If thats to much work dig down a foot and cut it off.
How much does it cost to move overhead power lines?
According to PG&E estimates, it costs approximately $3 million per mile to convert underground electric distribution lines from overhead. PG&E's cost to build new overhead lines is approximately $150 per foot or $800,000 per mile. New underground construction costs vary depending on trenching and paving costs.How much does it cost to move a utility pole?
Most Pepco poles cost between $2,000 and $60,000 to move, including restringing power lines and moving adjacent poles, said Pepco spokesman Bob Hainey, though some cost more.How do you get power lines buried?
Bury in the Ground: Dig 24 inches. At 24 inches you can bury underground feeder cable, using PVC conduit to 18 in. below ground only where the wire comes up. If you're considering running a power line underground through your yard, you have four options.How much does it cost to bury a power line to a house?
Since costs can be north of $750 per foot to actually bury power lines or 10 times greater than roughly $70 per foot to install them above ground, the most sense could be using more durable, smarter transformers, which can be more efficient from a power perspective as well as less cost invasive.How far does a pool need to be from power lines?
Power lines should be at least 25 feet away from the pool in all directions. Allow a minimum clearance in any direction of at least 18 feet between overhead power lines and a diving board, deck, platform, slide or observation area. Pools should never be constructed or placed over underground electric cables.What is the difference between power lines and telephone lines?
It is easy to tell power lines apart from these types of lines - power lines are always higher up on the pole, they always have insulators, and they do not touch other lines. Cable and telephone lines are located further down the pole and are directly attached to power poles without insulators.Can you put an above ground pool under power lines?
If you are thinking about installing a swimming pool, do not build it under electrical lines. Pools should only be built in areas at least 25 feet away from the power line in each direction, with at least 17 feet between overhead lines and diving boards, decks or slides.How close can you build to a power pole?
Minimum clearances This infrastructure includes pipes, poles, cables, wires, gas mains and connection points. The minimum clearance distance required is generally 1.5 metres. However, this can vary so check the required distances from powerlines, sewers, pipes and gas and water mains by calling us on 13 23 86.Can you get a telegraph pole moved?
We can: move, remove or relocate our telegraph poles, manholes, joint boxes, green cabinets, underground ducts and overhead cables to accommodate your construction. do pre-demolition if you're demolishing or redeveloping a property and our – or someone else's – telecommunications equipment is in the way.Can utility easements be moved?
To be a legal appurtenant easement, the properties involved must be adjacent to each other and must be owned by separate entities. The characterization of an easement will affect the rights to transfer the easement to another. Easements appurtenant are adjacent to the servient estate (the underlying land).Can a utility company come on my property?
The typical utility easement allows the utility provider, be they electric, water, gas, cable, etc., to come onto a property to install or maintain their physical infrastructure. Regardless, the utility company didn't run their services until they had guaranteed themselves an easement.Are guy wires dangerous?
How dangerous are “guy wires”? Guy wires are support structures that are anchored into the ground, to keep poles and energized conductors from falling, or sagging too much. They do not carry power, and, therefore, do not create an electrical hazard, unless poorly maintained.How do you anchor a power line to the side of a house?
Attach a conduit clamp to the conduit or mast 1 foot below the weather head using the wrench kit to bolt it around the conduit. Face the loop the power line attaches to in the direction toward the power pole.How do guy wires work?
A guy-wire, guy-line, or guy-rope, also known as simply a guy, is a tensioned cable designed to add stability to a free-standing structure. As the tower leans a bit due to the wind force, the increased guy tension is resolved into a compression force in the tower or mast and a lateral force that resists the wind load. 
