Can a furnace blower motor be repaired?

Furnace blower motors are like the heart, or one of the most important parts, of your HVAC system. If your furnace blower motor has failed, then fixing it issue can range from simple, do-it-yourself repairs, through to more complicated issues that require replacement parts and qualified service from a technician.

Similarly, how much does it cost to replace a furnace blower motor?

On average nationwide, a furnace blower motor replacement costs $400-$600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600+.

Secondly, what causes a furnace blower to stop working? Start by turning the furnace off, turn your thermostat to “fan only,” and wait a few minutes. If you see or hear the fan turn on, your blower motor is not the culprit. If the fan does not start, you have a wiring issue (circuit breaker trips) or motor problem (circuit breaker does not trip).

Herein, how long do furnace blower motors last?

20 years

What causes a furnace blower motor to go bad?

Weak Airflow from the Vents There are a number of possible reasons why this is happening, including dirt and dust buildup, bad capacitor, and an aging motor. If your blower motor is dirty or has a bad capacitor, you can call in an HVAC technician to fix the problem.

What happens when your blower motor goes out?

No air flow from the vents when the heater or air conditioning is activated is another symptom of a bad blower motor. If the heater blower motor burns out or short circuits, it will not function, and therefore will not be able to produce any airflow for the system.

How do you reset a furnace blower motor?

How to Find My Furnace Motor Reset Button
  1. Turn off the power to the furnace at the circuit breaker. The circuit breaker is clearly marked.
  2. Lift up the blower compartment cover to access the blower wheel and blower motor.
  3. Look for a small red or yellow button on the side of the blower motor.
  4. Press the reset button down if it has popped up.

Where is the blower motor located on a furnace?

Replacing a Furnace Blower Motor. Turn off power to the furnace at the service panel. Open the furnace door and locate the squirrel cage blower. The motor is located in the middle of the blower and is accessible from one side.

Why is my furnace not blowing warm air?

Furnace overheating can be the cause of your cold air dilemma. Changing the dirty air filter can solve this problem. The dirty air filter blocks the airflow, causing the furnace to run longer to heat your home until it overheats. It is important to note that constant overheating can damage your heat exchanger.

What causes a furnace motor to burn out?

High heat causes motor insulation to fail prematurely. If the motor windings are burning out frequently during heating season and not cooling season, the cause is probably that the high heat is worse during the heating season when the blower is delivering hot air.

How much is a blower motor for a Lennox furnace?

Lennox Blower Motor Replacement Cost Furnace blower motors will vary in cost depending on the type of motor. On average this is between $500-$1800. A basic ac motor (alternating current) will be on the lower side of the spectrum costing closer to $500.

How do you test a blower motor?

How to Test a Blower Motor
  1. Use voltmeter or ohmmeter to check for a blown fuse. If you find one, replace it.
  2. Start car and see if blower motor works. If fuse blows again, check for loose circuits.
  3. If the circuits are in good repair but the blower motor keeps blowing fuses, replace the blower motor [source: You Fix Cars].

How do I know if my fan motor is bad?

Signs and Symptoms of a Bad AC Fan Motor
  1. The fan won't start even though the AC is on.
  2. The fan won't stop, even when you shut the AC off.
  3. The fan turns on, yet the blades are rotating very slowly.
  4. There's a rattling noise coming from the condenser unit when the fan is turned on.

How much does it cost to replace a blower fan?

The average cost for a blower motor replacement is between $363 and $394. Labor costs are estimated between $87 and $111 while parts are priced between $276 and $283. Estimate does not include taxes and fees.

What is a PSC furnace blower motor?

One of the primary energy consumers in your heating system is the furnace blower motor. On many installed furnaces, the original (OEM) blower motor is a PSC model. Short for permanent split capacitor, PSC motors are designed to do what furnace motors have always done in the past: simply turn on and off.

How much does it cost to replace a blower motor on an AC unit?

Cost to Replace Central or Forced Air Blower Motor Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.

How efficient is a 20 year old furnace?

20-year-old furnaces have an annual fuel utilization efficiency, or AFUE, of 78% or less, according to the U.S. Department of Energy. AFUE is the basic energy efficiency rating system used in the HVAC industry.

Should I replace my 30 year old furnace?

Regardless of the logic you follow, the 30-year mark is at or close to the maximum lifespan you should expect from your furnace. Even though furnaces can last 30 years or beyond, most experts recommend that you start shopping for a new furnace when your existing unit is 15 years old.

Should I replace a 15 year old furnace?

According to the U.S. Department of Energy, a furnace should last 15-30 years before you'll need a replacement. Overall, use the following to judge whether to replace your furnace due to age: Repair: If the system is less than 15 years old, it's often best to have it serviced rather than install a new one.

How much does it cost to replace a blower motor resistor?

The average cost for a blower motor resistor replacement is between $119 and $161. Labor costs are estimated between $47 and $60 while parts are priced between $72 and $101. Estimate does not include taxes and fees.

Are furnace blower motors universal?

Motor manufactures make universal blower motors that can be wired to run at a wide range of settings depending how they are wired.

How do I lubricate my furnace blower bearings?

Lubricate bearings if necessary Some older furnaces have two motor bearings and two blower shaft bearings that require annual oiling. Clean around the oil caps and remove the caps. Apply two to three drops of lightweight machine oil and replace the caps. Don't over-lubricate!

You Might Also Like